Your Partner In Contract Electronics
Manufacture And Design, since 1989
"Quality Endures long after price is forgotten"

Tel: 0161 947 8000

 
 

 

100 BaseT Crossover Cable - 100 BaseT crossover cable pinout diagram for building a cable to connect two network interface cards (NIC's) together, cascade hubs, etc. The pinout diagram and information below should help you to further understand the 100 BaseT crossover cable wiring scheme.

 100_BaseT_Crossover_Cable_Pinouts

100_BaseT_Crossover_Cable_Pinouts

 

 

MONITOR PINOUTS
Connector

IBM  VGA / SVGA / XGA
   monitor / video connector   
MAC II / QUADRA
   monitor / video connector   
15pin H/D
Connector
1 red 1 red ground
2 green 2 red
3 blue 3 C sync
4 ID bit 4 sense pin
5 n/c 5 green
6 red ground 6 green ground
7 green ground 7 sense pin
8 blue ground 8 n/c
9 n/c 9 blue
10 ground 10 sense pin
11 ID bit 11 ground
12 ID bit 12 V sync
13 H sync / Composite 13 blue ground
14 V sync 14 ground
15 n/c 15 H sync
     


VGA 9pin D-Sub Connector
PIN DESCRIPTION
1 RED Red Video
2 GREEN  Green Video
3 BLUE Blue Video
4 HSYNC Horizontal Sync
5 VSYNC Vertical Sync
6 RGND Red Ground
7 GGND Green Ground
8 BGND Blue Ground
9 SGND Sync Ground


9pin to 15pin D-Sub VGA Adapter Cable
  9pin D-Sub 15pin D-Sub
  PIN PIN
Red Video 1 1
Green Video 2 2
Blue Video 3 3
Horizontal Sync 4 13
Vertical Sync 5 14
Red GND 6 6
Green GND 7 7
Blue GND 8 8
Sync GND 9 10 + 11


Macintosh to VGA Video Adapter Cable
connection of a Mac computer to a VGA monitor
DESCRIPTION Mac VGA
Red Ground 1 6
Red 2 1
Composite sync 3 13
Monitor Sense 0 4 4
Green 5 2
Green Ground 6 7
Monitor Sense 1 7 11
No connection 8 n/c
Blue 9 3
Monitor sense 2 10 12
Sync Ground 11 10
Vertical Sync 12 14
Blue Ground 13 8
Horizontal Sync Ground 14 n/c
Horizontal Sync 15 n/c

 

SCART Euro AV Connector
SCART 21 Pin Euroconnector
Connector
Connector may be reversed depending on which side is viewed. All pins are numbered.
Pin No.
Function
Pin No.
Function
1
AUDIO Output Right
2
AUDIO Input Right
3
AUDIO Output Left
4
AUDIO Ground
5
BLUE Ground
6
AUDIO Input Left
7
BLUE
8
Function Switching
9
GREEN Ground
10
Comm Data 2
11
GREEN
12
Comm Data 1
13
RED/Chroma Ground
14
Comm Data Ground
15
RED/Chroma
16
Blanking
17
VIDEO/Sync/Luminance Ground
18
Blanking Ground
19
VIDEO/Sync/Luminance Output
20
VIDEO/Sync/Luminance Input
21
Common Ground

SCART CONNECTOR PINOUT Table 1

Table 1 was the original and allows for composite video input/output, RGB inputs and stereo audio. Table 2 was added to take S-video (S-VHS and Hi-8) inputs. This made pin 15 chrominance and pin 20 luminance.



Many TV sets have 2 SCART sockets. One is usually loke table 1 and the other like table 2, and pin 20 switchable from composite to S-Video luminance.
The first can switch from a composite input to RGB input. The second can switch from a composite input to an S-Video input, pin 20 being either composite in or luminance in. Usually the second socket outputs a selectable composite signal on pin 19.

Pin      Signal    Level     Impedance   
       
1 Audio Out Right 0.5 V rms <1k ohm
2 Audio In Right 0.5 V rms >10k ohm
3 Audio Out Left + Mono 0.5 V rms <1k ohm
4 Ground Audio    
5 RGB Ground Blue    
6 Audio In Left + Mono 0.5 V rms >10k ohm
7 RGB Blue In 0.7 V 75 ohm
8 Audio/RGB switch / 16:9 High (9.5-12V) AVmode
Low (0-2V) TVmode
>10kohm
9 RGB Ground Green    
10 Comms Data 2         
11 RGB Green In 0.7 V 75 ohm
12 Comms Data 1    
13 RGB Ground Red    
14 Ground Data    
15 RGB Red In / Chrominance 0.7 V (Chrom.: 0.3 V burst) 75 ohm
16 Blanking Signal High (1-3V) RGB
Low (0-0.4V) Composite
75 ohm
17 Ground Composite Video    
18 Ground Blanking Signal    
19 Composite Video Out 1V including sync 75 ohm
20 Composite Video In 1V including sync 75 ohm
21 Ground/Shield (Chassis)    


SCART CONNECTOR PINOUT Table 2

Pin      Signal    Level     Impedance   
       
1 Audio Out Right 0.5 V rms <1k ohm
2 Audio In Right 0.5 V rms >10k ohm
3 Audio Out Left + Mono 0.5 V rms <1k ohm
4 Ground Audio    
5 RGB Ground Blue    
6 Audio In Left + Mono 0.5 V rms >10k ohm
7 - - -
8 Fuction Select High (9.5-12V) AVmode
Low (0-2V) TVmode
>10kohm
9 RGB Ground Green    
10 Comms Data 2         
11 - - -
12 Comms Data 1    
13 Ground (chrominance)    
14 Ground Data    
15 Chrominance input 0.3V 75 ohm
16 - - -
17 Ground (luminance)    
18 - - -
19 Video output (composite) 1V including sync 75 ohm
20 Luminance input 1V including sync 75 ohm
21 Ground/Shield (Chassis)    


Cable between VCR and TV (Scart)
TV VCR
Audio Right Out 1 2 Audio Right In
Audio Right In 2 1 Audio Right Out
Audio Left Out 3 6 Audio Left In
Audio Left In 6 3 Audio Left Out
Audio Ground 4 4 Audio Ground
Red 15 15 Red
Red Ground 13 13 Red Ground
Green 11 11 Green
Green Ground 9 9 Green Ground
Blue 7 7 Blue
Blue Ground 5 5 Blue Ground
Status / 16:9 8 8 Status / 16:9
Reserved 10 10 Reserved
Reserved 12 12 Reserved
Fast Blanking Ground 14 14 Fast Blanking Ground
Fast Blanking 16 16 Fast Blanking
Video Out Ground 17 18 Video In Ground
Video In Ground 18 17 Video Out Ground
Video Out 19 20 Video In
Video In 20 19 Video Out
Ground 21 21 Ground


S-Video Cable for Scart S-Video Input
S-Video Out TV, Scart (Input)
Luminance Out (Y) 20 Luminance In
Chrominance Out (C) 15 Chrominance In
GND 4+17 GND
Audio Out L 2 Audio In L
Audio Out R 6 Audio In R


S-Video Connection Pinout
PIN DESCRIPTION Impedance Level
1 GND Ground (Y)    
2 GND Ground (C)    
3 Y Intensity (Luminance) 75 Ohms 1V incl. Sync.
4 C Color (Chrominance) 75 Ohms 0.3V Burst
View to the solder side
of the male connector


 

 

Visitor : Hit Counter Since Sept 2002

© Assembly Contracts Ltd Manchester UK 2007

Site Last Update : Sunday, August 26, 2007

Visitor No: